K'MX EVO with 7 axes has been designed for machining of parts from Ø 3 to Ø 32 mm.
The highlight of this series is 2 oil-cooled electrospindles (built-in motor), with a power output of 10.5 kW on the main spindle.
The stroke of the spindle is up to 400 mm.
The two separate tools racks can simultaneously machining (ex roughing and finishing).Optionally, both linear slides are equipped with driven tools to perform simultaneous drilling and milling.
These 2 tools racks are complemented by an end working attachment for internal operations with the possibility to simultaneously work on the main and sub-spindle, Powered tools (optional) are also available on both sides.
The generous work space permits free chip flow and maximum accessibility.
Advantages :
Technical data | ø 26 | ø 32 |
---|---|---|
Number of axes | 7 | 7 |
Main spindle | ||
Maximum bar capacity | ø 26 mm | ø 32 mm |
Spindle bore | ø 37 mm | ø 37 mm |
Electrospindle (100/40%) | 7,5/10,5 kW | 7,5/10,5 kW |
Maximum spindle speed | 8.000 rpm | 8.000 rpm |
Headstock stroke | 380 mm | 365 mm |
Slide - Toolholder | ||
Number of slide | 1 | 1 |
Number of tools | 2x5 | 2x5 |
External machining tool shank size | 16x16 mm | 16x16 mm |
Endworking attachment | ||
Number of slide | 2 | 2 |
Number of tools | 2x4 | 2x4 |
Stroke (Y) | 260 mm | 260 mm |
Sub spindle | ||
Maximum bar capacity | ø 26 mm | ø 32 mm |
Spindle bore | ø 37 mm | ø 37 mm |
Electrospindle (100/40%) | 3,7/5,5 kW | 3,7/5,5 kW |
Maximum spindle speed | 8.000 rpm | 8.000 rpm |
Maximum length of part inside the sub spindle | 150 mm | 150 mm |
Maximum length of part for frontal ejection | 200 mm | 200 mm |
Numerical controls | Fanuc | Fanuc |
Options | ||
Powered tools | ||
C axis on main and sub spindle | ||
Fire extinguisher | ||
Fume extractor | ||
Swar conveyor | ||
High pressure coolant | ||
Guiding and device for long parts trough sub spindle |